The E07 error on your Siemens Dishwasher means the drain pump cover or filter housing is not properly seated or secured. This prevents the dishwasher from operating safely and will stop the cycle immediately.
| Error code | E07 |
|---|---|
| Meaning | Drain pump cover or filter housing is open, loose, or incorrectly fitted |
| Severity | Low — A simple mechanical issue that prevents operation but causes no damage |
| Time to fix | 5–15 minutes |
| Tools needed | None |
What the E07 error means
The E07 error code indicates that the drain pump cover, filter assembly, or filter housing is not correctly positioned or locked into place. Siemens dishwashers have a safety mechanism that detects when the filter area is not properly closed, preventing water from leaking during operation. When the dishwasher detects this issue, it will not start or will stop mid-cycle and display the E07 code to alert you to the problem.
Common causes
- Filter assembly not fully twisted or locked into position after cleaning
- Drain pump cover not seated correctly in the filter housing
- Debris or food particles preventing the filter from seating properly
- Damaged or warped filter housing that prevents a secure fit
- Broken locking mechanism on the filter assembly
- Filter components reinstalled in the wrong order after cleaning
How to fix the E07 error
- Remove and inspect the filter assembly Open the dishwasher door and locate the filter system at the bottom of the tub. Turn the cylindrical filter counterclockwise to unlock it and lift out the entire filter assembly. Check all components for damage, cracks, or warping that might prevent proper seating.
- Clean the filter area thoroughly Remove any food debris, broken glass, or foreign objects from the filter housing and surrounding area. Wipe the sealing surfaces clean with a damp cloth to ensure nothing will prevent the filter from sitting flush. Check the pump cover underneath for any obstructions.
- Reinstall the filter correctly Place the flat mesh filter into the base first, then insert the cylindrical filter into the centre hole. Ensure the arrow on the filter aligns with the arrow on the housing. Turn the filter clockwise until it clicks firmly into place and cannot be lifted without turning it counterclockwise.
- Verify the pump cover is secure Check that the drain pump cover beneath the filter sits flat and flush with the housing. Press down gently to ensure it is properly seated. If it feels loose or does not sit level, remove the filter again and reposition the pump cover.
- Reset the dishwasher Close the dishwasher door and press the power button to turn the appliance off. Wait 30 seconds, then turn it back on. Start a rinse cycle to verify the error has cleared. If the E07 code persists, repeat the filter installation process.
- Check for damaged components If the error continues after proper reinstallation, inspect the filter assembly and housing for cracks or damage. Check that the locking lugs on the filter are intact and that the housing threads are not stripped. Replace any damaged parts with genuine Siemens replacements.
FAQ
Can I run my Siemens dishwasher with the E07 error showing?
No, the dishwasher will not operate with the E07 error displayed. This is a safety feature to prevent water leaks and potential flooding. You must resolve the filter housing issue before the dishwasher will run.
How do I know if the filter is locked in place correctly?
The cylindrical filter should click audibly when turned clockwise into the locked position. You should not be able to lift it out without turning it counterclockwise first. The arrows on the filter and housing should align when properly locked.
What should I do if the filter keeps coming loose during cycles?
If the filter repeatedly unlocks during operation, the locking mechanism may be damaged or worn. Inspect the locking lugs on the filter and the threads in the housing for damage. You may need to replace the filter assembly or housing if components are broken or worn beyond effective use.
