How About a Little Bit of Advice on the Best Wood to Use for Coasters?

You may construct a set of coasters out of a variety of woods, and they'll serve you well whether you're making them as a present or for yourself. Plywood, polyurethane, polycrylic, and metal-dipped are among the most common.


To keep your wooden table tops in pristine condition, apply a coat of Polycrylic. It may also be used to prevent scratches and give luster to unfinished wood. Polycrylic is an environmentally safe finish since it is water-based.

Water-based polycrylic sealer is readily applied using a foam roller or spray bottle. It's fine for use on any kind of wood indoors, but you shouldn't put it in the elements. As polycrylic provides a watertight coating, it is an excellent choice for protecting wood from the elements.

It works well on heavily trafficked wood floors. Be careful to use place mats to avoid scratching the table top if you intend to use it there. Stains and cracks in the polycrylic coating can be caused by coffee and other hot beverages.


Coasters made from polyurethane wood are a wonderful example of your woodworking skills. This coating lasts a long time, doesn't become scratched up, and never needs to be touched up. A solid wood tabletop would also benefit greatly from this treatment. Nonetheless, a lot of hard work is required to achieve a high-quality end result.

Several approaches exist for achieving this goal. Acquiring a ready-made set of hardwood coasters is one possibility. Miter saws can also be used to cut the materials to size. Instead, you may use cork or felt as a glue. Then, spread the coating on with a foam roller or sponge brush. The final step is to sand it down until it's smooth.

Whatsit, and What is it Called?

Make some coasters using Mod Podge and use them to spruce up your house or give as a one-of-a-kind present to a friend. This decoupage material made from white glue is great for any task and can be applied to anything from wood to glass.

Applying Mod Podge on coasters in three layers yields the greatest results. Spread some Mod Podge onto the back of your paper first. As a result, you won't have to worry about creasing or bubbling. Thereafter, you may go ahead and add a second layer.


Plywood may be used for anything from furniture to cabinets, and even as a material for producing coasters. In addition to being inexpensive, plywood is also quite convenient to deal with. If you don't want it to get wet and swell up, though, you'll need to seal it correctly. Or, you may give it a coat of paint or stain.

To make your coasters watertight, you may use any one of several different sealers. You can paint with a roller, a spray can, or a brush. If you really want your coasters to last, you could even give them a second poly coat. Fabric spray sealer can also be used to protect against spills.

Covered in a Layer of Metal

Metallic dipped wood for coasters are a great investment whether you're trying to impress a potential employer or give your current furnishings a facelift. Getting a high-quality set requires knowing where to look. Going to a hardware or home improvement store is a good first step. Selecting the appropriate wood is the next step. To achieve the desired sheen, you may need to sand by hand. Apply a thin layer of polyurethane to preserve the shine when you're done.

To the State of Oregon

There are several alternatives available for those who want to display their love for the Beaver State or who simply want to add a little bit of Oregon wood to their coasters. Some are solid wood while others are veneered in walnut. Depending on the type of wood used, there might be significant differences in appearance across coasters. Whether you're shopping for a buddy or seeking to spice up your own table, an Oregon state coaster is a great option.


Just added to your cart:
Excl. postage 
My Bag
Just added to your wishlist:
Excl. postage 
My Wishlist
You can contact us at or use the live chat feature at the bottom of the website!
Spin to win Spinner icon