A Guide to Making Your Own Coasters

Homemade coasters may be created in a variety of ways. Materials like wine corks, coasters made from blackboard paint, comic books, and wine corks can all be used. The nice thing is there are many different styles available to select from.

Coasters Made of Clay That Have Been Let to Cure in the Air

Making coasters out of air-dry clay may be a fun activity for kids of all ages. They're simple to create, won't break the bank, and will keep your furniture in pristine condition while giving your space a special look and feel. This method may also be used to great effect as a Christmas decoration.

To manufacture decorations, accessories, and more, air-dry clay is a versatile and cheap creative medium. It may be used confidently around kids because it is simple to operate, long-lasting, and safe.

Making coasters is a great way to get started with air dry clay, or to attempt a new method if you're already an expert. However, there are a few details to keep in mind when fashioning a clay coaster.

Coasters Made of Chalkboard

These do-it-yourself chalkboard coasters are a ton of fun to make and can be used for a variety of purposes. They are not only an excellent table accessory, but also a thoughtful present.

You'll require a few items to get started. You'll want a rather big tile for this. Add chalk and paint to your supplies list. Use ordinary chalk for this activity. A blackboard coaster made from this material would last a long time and look excellent.

Then, a cork liner is required. Make a cutout for the tile. Ensure a firm hold by making sure it is fastened properly. The tile's surface should next be primed using no sanding primer.

The next step is to paint the surface with the right amount of chalkboard paint. If you want to be safe, you should apply at least three coats and wait at least an hour in between each one. After waiting an hour for the paint to dry, you may use the coaster for note taking.

Cork Mats for Your Wine

Making wine cork coasters is a fun and easy project that would be appreciated as a present or treated as a treat for yourself. The procedure is easy and provides a fantastic opportunity to reuse something that would otherwise be thrown away.

To begin, sanitize some corks by boiling them for around 10 minutes. You may begin slicing them once they have cooled off. In order to make a coaster, you will need roughly 19 pieces.

Many people use hot glue to secure the corks together. Let the adhesive set for at least a day once you're done.

Using a sticky adhesive is another option for adhering things together. This technique is most effective when used on a clean, unfinished surface. A sheet of white paper can serve the same purpose of avoiding damage to the table.

Coasters That Look Like Comic Books

Comic book coasters may be made using simple supplies found at any hardware shop. They're great for giving to comic book readers, and they may be as basic or intricate as you choose. It's also possible to purchase a ready-made coaster that already includes the feet.

To make your own comic book coasters, you'll need a clear acrylic sealer, a brand-new comic book, some time, and a lot of patience. Luckily, all three may be completed in under two hours without sacrificing your ability to take pleasure in your work. Moreover, the material is cheap enough that several may be purchased and kept as spares.

Acrylic Sealer Should be Used to Keep Moisture Out

The application of acrylic sealer on wood allows for the creation of coasters. This will prevent them from becoming wet and will shield them from the sun's rays, heat, and water. Additionally, it may enhance the natural beauty of the wood by bringing out its vibrant hues.

Craft stores typically stock a wide selection of acrylic sealer sprays for just such an occasion. Polyacrylics, water-based polyurethane, and furniture wax are just some of the options available to you. Wooden objects should be given many, light applications of sealer. It is important to wait for each layer to dry before applying the next.

The transparent acrylic sealant Mod Podge is widely used. Use a foam brush to spread it on. Always remember to protect the entire coaster. The Mod Podge will be dry after drying for roughly an hour.


Just added to your cart:
Excl. postage 
My Bag
Just added to your wishlist:
Excl. postage 
My Wishlist
You can contact us at info@woodenearth.com or use the live chat feature at the bottom of the website!
Spin to win Spinner icon