How Hard Is It to Craft a Wooden Wedding Ring?

There are many steps involved in crafting a wooden wedding ring. These include sanding, heat tempering, and lamination. These processes will all require specific tools and equipment. The following steps are an overview of the various steps involved. After completing all of the steps, the ring blank should be ready to be glued and finished.

Lamination

When crafting a wooden wedding ring, the most important consideration is the thickness of the wood. A ring that is made from thick wood will be sturdier than a ring that is made of thin wood. The wood that you choose should be dense and rich in color. You want to avoid soft woods as they will crack easily during the shaping process.

If you want a ring that is made from a variety of woods, you can use a veneer to add a higher level of dimension. Veneer comes in many different species and is sold in small packs. The wood used for veneer can vary in color and texture, and it can be used as an accent in the lamination process.

Heat Tempering

If your wedding ring is made from wood, you may want to consider heat tempering it. This process strengthens the cells of the wood and improves its appearance. It will require you to use a heat gun to treat the wood, which will cause the ring to shrink in size.

Once the wood has been cooled, sand the ring. You will want to use light pressure and move slowly as you work. The goal is to achieve a smooth surface for the final product. You will want to use a belt sander to do this. When you get close to the desired shape of the ring, you should finish by applying paper.

You may also want to protect the ring by soaking it in mineral or vegetable oil. It also helps to apply Band Balm to protect it from the elements. This product should be applied to the ring with a lint-free cloth. Wooden rings should be kept out of direct sunlight to prevent tampering.

Beveling

One of the best ways to create an attractive wooden wedding ring is by creating an inlay. Inlays are pieces of wood cut to fit into an opening and sanded flush with the surface. They make for a much more attractive ring, and if you know how to do it, they are not difficult to make.

You can also design a wooden wedding ring yourself if you have some basic tools. You'll need a block of dense scrap wood, a drill press, a vice, a Dremel tool, and an automated belt sander. After you've cut out your ring's shape, you'll need to sand it one final time to smooth out rough spots and bevel edges.

Sanding

The process of sanding a wooden wedding ring can be tedious and creative. However, it is vital that you follow certain rules while sanding a wooden wedding sand ring. Sanding a ring requires constant movement and the right sandpaper for the job. You should also use a heating source to temper the ring.

If the wood is unfinished, you can apply a drying oil to the surface. This can be a great way to protect your ring from abrasions and scratches, but be careful not to over-do it. Once the ring has cooled down, you can place it back on your finger and sand it again.

If you want a more durable finish, you can apply a CA or epoxy coating. This process involves coating a ring in clear plastic, buffing the layer, and applying a clear epoxy finish to its surface. These methods can be applied in stages to achieve the desired sheen.

Search

Just added to your cart:
Qty:
Total:
Subtotal:
Excl. postage 
My Bag
Just added to your wishlist:
Excl. postage 
My Wishlist
You can contact us at info@woodenearth.com or use the live chat feature at the bottom of the website!
Spin to win Spinner icon