There are a variety of methods you may use to clear mold off wooden cutting boards. As a first step, never expose children to raw meat that has been sliced. Second, mold can be eradicated with citric acid or bleach. The third step is to take precautions against mold growth again.
Cleaning
Without regular care, wooden cutting boards can develop stains and mildew. They need to be professionally cleaned and sanitized frequently. Stains may be removed using an ordinary home cleaner.
The first step is to give the board a good scrub. Wash the board in a circular motion with soapy water or warm water. The board may be dried with a soft towel after being rinsed.
Bleach may be used to remove even the most set-in stains. One teaspoon of unscented liquid chlorine bleach can be mixed with eight cups of warm water to create this solution. Let the solution sit on the soiled area for five minutes after you've poured it on. A dishwashing brush can also be used to clean the board.
Bleaching
It's crucial to use clean, stain-free hardwood cutting boards while making meals. These can be tough to get rid of, but there are several easy fixes that will have them looking like new again in no time.
The first step is to remove any traces of previous meals. You can use a sponge or moist towel to do this. Make sure the board is completely dry before using it. If you leave the board out for too long, it may bend, break, or even develop mold.
Cleaning the board is the next step. An abrasive sponge or cabinet scraper will do the trick. You shouldn't scuff the board or rip it to shreds.
Acid Citric
Your wooden cutting board has to be restored if it has become discolored, smelly, or stained. Disinfecting cutting boards is the most effective method for removing mildew and discoloration. This can be accomplished in one of two ways: chemically or naturally.
Hydrogen peroxide, the basis of the chemical approach, is effective against bacteria. Although it is not as powerful as bleach, it is a much safer option. Your hardwood board may be treated with a 3% hydrogen peroxide solution. The light will kill any germs that could grow in the next five to ten minutes. After applying the solution, wash the board with water and wipe it down with a fresh sponge.
The wooden board can also be treated with a mild bleach solution. The U.S. Department of Agriculture's Food Safety Inspection Service suggests this. The use of this procedure will also eliminate any mold growth. Keep in mind, nevertheless, that you shouldn't soak the cutting board in the cleaning solution.
Wooden cutting boards should not be used for preparing raw meat.
Wooden cutting boards provide a risk when used with raw meat. Even if it doesn't pose a direct health risk, mildew may be unsightly and unpleasant. Thorough cleaning is the best defense against this.
Always disinfect your cutting board with soap and water before using it to prepare raw meat. The spread of microorganisms will be slowed down as a result of this.
You should wipe off your board after each usage, whether it's made of wood or plastic. Sponge-wash the wood to achieve this effect. Then, wash it with tepid water.
The wood can also be disinfected using a combination of baking soda and vinegar. This is a good way to eliminate mold and bacteria. After that, you may oil the board with mineral oil. Two hours later, once it has absorbed into the wood, remove it with a paper towel.
Keeping Mold from Returning
Wooden cutting boards are susceptible to mold growth, so if you've seen a lot of it lately, you may want to find a solution to keep it at bay. Mold may be avoided on wooden cutting boards if they are kept clean.
Mold may get into wood and cause it to decay and distort. It may be hazardous to your health as well. It's best to see an expert if you have any concerns about a possible issue.
Mold may be removed using a number of different all-natural approaches. Baking soda is one option. This gentle disinfectant can help get rid of any lingering odors or stains on your board. A toothbrush or scouring pad will work well to apply it to the area.
The oil from the tea tree is another natural treatment. Tea tree oil is an effective antifungal that may be used to get rid of mold. However, the cost of this all-natural remedy is more than that of certain alternatives.
