How to Make a Beaded Necklace Step by Step

If you're looking for a crafty way to express yourself, a beaded necklace is a great choice. These necklaces are the grown-up version of childhood necklaces. Stringing your beads one by one is relatively easy, but knotting them helps you create a more finished look. It also keeps the beads from falling off the strand, which is helpful when working with delicate beads.

How to Make a Beaded Necklace

There are several steps in making a beaded necklace. First, you need to thread your needle onto a piece of thread. This thread is commonly called FireLine. Then, add some beads, starting with a larger one, and work your way down. You can also use bead stoppers to prevent your beads from falling off the thread. After you have secured each bead, add the clasp to the end of the necklace.

Beading is relatively easy and straightforward. The key to success is proper preparation. Using a bead board with groves allows you to lay out your beads during the design process. Some boards even have curved channels to make it easier to visualize your finished necklace. In addition, many boards have inch markings and compartments for storing beads. Flocked boards are also helpful since they prevent beads from rolling around.

Once you have all the beads placed, you can create a beaded necklace that is endless. To do this, just make sure you have two open ends facing in opposite directions. Place four or more beads on each side. Once the necklace is long enough, cut the thread.

Once you have the basic framework for your beaded necklace, you can add beads to it by stringing them one by one on a strand of wire. Start by stringing seed beads onto the strand. You can also use crystal rondelle beads if you like.

Using a Bead Board

The bead board helps you to plan your design and string the beads easily. It has channels on both the inside and outside of the board to help you line up the beads and ensure that they're evenly spaced. It also features a triangular sorting tray to scoop out beads from the corners of the board.

Beading thread can be purchased from a craft store and is usually inexpensive. Specialty beads can be found at bead stores or online. Lightweight beads should be strung with beading thread or flexible beading wire.

The next step in making a beaded necklace is choosing the length. The length will depend on the type of necklace you want to make. For instance, a short necklace is ideal for a young person but may not suit a big, mature woman. The purpose of the necklace is also an important factor. Formal necklaces are generally short and simple, whereas informal necklaces can be long and busy.

When stringing the beads, you can use stainless steel wire. It will be easier for the beads to move around and will increase the necklace's value. Make sure that the beads are not too small as this can create a choking hazard for small children. Also, do not string the beads too tightly, as this will increase the risk of the necklace breaking.

Using a Bead Board to Make a Beaded Necklace

Using a bead board can help you position the beads in a specific way and improve your design skills. It will also help you determine the length of the necklace. The board is divided into channels for placing the beads, and some boards have insets for holding beads.

Begin by placing your beads on the bead board starting at zero. Next, measure the length of the necklace by using dashes and numbers. When you're satisfied with the length of your necklace, cut it to the right length plus six inches. For instance, if you're making a dollar necklace, you'll need a necklace length of 22 inches.

When you're working on a beaded necklace, it's important to make sure that you plan out the design before you begin stringing the beads. A bead board allows you to test out various color combinations and patterns, as well as different designs. This saves you valuable time when you're stringing beads. Another benefit of using a bead board is that it can accommodate any type of bead, no matter how small or how big it is. This is especially important when you're working with beads with jagged edges or heavy beads.

When working with a bead board, be sure to follow the directions carefully. For instance, avoid crimping the beads, which can result in a broken necklace. Be sure to leave enough thread to wrap the bead board after you're done.


Just added to your cart:
Excl. postage 
My Bag
Just added to your wishlist:
Excl. postage 
My Wishlist
You can contact us at or use the live chat feature at the bottom of the website!
Spin to win Spinner icon