Making Personalized Tile Coasters with Mod Podge

An easy and simple craft is to modge-podge images into tile coasters. You can make your own unique tile coasters in no time by following these easy instructions. You may use these coasters for everything from birthday celebrations and weddings to decorating your house.

Step 1

DIY picture coasters from your favorite images are easy using mod podge. Furthermore, it is a fantastic concept for presents. Wood, maps, and paper can all benefit from its application.

Start by trimming a piece of felt to fit your tile. Tiles with grooves will require the felt to be pressed into the grooves. Using this will reduce the risk of your tile scratching surfaces. It may also be used as a glue.

Once that's done, spray the coaster with a clear protective spray. When the mod podge has dried, you may proceed with this. Clear acrylic sealant is readily available from a variety of sources, including the internet and hobby shops. Using the sealer, your photograph will be protected from rain and snow.

A second coat of mod podge can be applied over the photo when the sealant has dried. It's recommended to wait 24 hours for this to dry.

The second coat of mod podge may be applied once the first has dried, and then your photo can be stuck to the tile. It's up to you whether to firmly press the photo down or simply let it dry. While the mod podge is still wet, you may also pick it up. The picture is more likely to stay centered on the base with this in place.

As soon as the picture is in place, you may seal any spaces between the tile and the picture. Alternately, you may paint right over the photo if you choose.

Step 2

A image can serve as the basis for a tile coaster that can be used to protect your table from spills. In the same way, you can use a photo to create a decorative piece for your wall. In order to make a tile coaster, you will need a tile, an image, and some Mod Podge.

You'll need to start by printing off the image. You may use either a standard inkjet printer or a high-quality laserjet printer. If you want the picture to print properly, you'll need to make sure it's in the right orientation. The picture must be cut out at the appropriate size.

The next step is to coat the back of the photo with Mod Podge. Layers of this adhesive should be very thin. The recommended margin of white space around a picture is 0.2 inches. Put on a layer of Mod Podge and let it dry. If more than one coat is required, apply them. After that, let the image a few hours to dry.

The picture's back can then be coated with Mod Podge Gloss. This will provide a glossy finish to the image. You may reapply this as many times as you like, and each time it should dry clear.

The picture has to be polished once the coating is applied. Your finger or a credit card will work for this. A folder can be used to flatten any bumps.

Step 3

A fantastic method for transferring pictures on tiles is using Mod Podge. It may be used for a wide variety of purposes, including arts & crafts and home decor. It can be used to make anything from personalized coasters and picture albums to beautiful house accents. It may be applied to a wide variety of surfaces and dries clean.

Mod Podge is versatile enough to be used on a variety of surfaces, including tile coasters, ceramic tiles, and even wood. Mod Podge may also be used to cover the reverse of scrapbooking paper. It may be used to make unique presents for loved ones.

Ceramic tile coasters with photographs printed using a laserjet printer are the greatest option. Using standard printer paper, you may also create your own unique photo coasters. Color may be added by painting the tile perimeters. The end result is a more polished presentation thanks to this. To personalize your coasters with names and dates, you may use stamps.

If you want your Mod Podge to look well, make sure you apply it evenly. The image might be damaged by excessive rubbing. A credit card or folder can be used to remove air bubbles.

It's recommended to wait at least an hour after applying Mod Podge before moving on to the following stage. Two or three iterations of this procedure will be necessary.


Just added to your cart:
Excl. postage 
My Bag
Just added to your wishlist:
Excl. postage 
My Wishlist
You can contact us at or use the live chat feature at the bottom of the website!
Spin to win Spinner icon